Profile

公司档案

Tapco Roofing Products

店铺名称
Tapco Roofing Products
公司名称
Tapco Roofing Products
资料认证
企业资料未认证
保证金
¥0.00
公司类型
所在地
全国
公司规模
注册资本
未填写
注册年份
Tapco Roofing Products

Tapco Roofing Products

Modular build allows a home to be built much quicker than with traditional building methods. Wee Houses are completed to ceiling height, with kitchens, bathrooms, plumbing and electrics already fitted before they leave the factory – fully complete and ready to move in within 3 weeks of being delivered to site. As the single contractor responsible for all works from design through to completion, The Wee House Company is in a unique position to provide accurate, upfront costs for the entire project, from start to finish. TapcoSlate Classic is an ideal solution for modular roofing builds due to its high impact-resistant qualities, light weight and ease of install, including simple cutting and shaping. Tapco Roofing Products is proud to provide the choice of its flagship TapcoSlate Classic roofing product to customers and partner with such a unique and innovative company in the UK modular marketplace; we urge you to go check out The Wee House Company’s website for more images and completed bespoke modular housing projects: https://theweehousecompany.co.uk

“We are delighted with our latest Wee House build on Islay featuring the TapcoSlate roofing. A tiled roof was stipulated as a planning condition for this build and it really looks fantastic, complementing the classic ‘Wee House look’ perfectly. We will certainly work with Tapco Roofing Products again and thank them for the high-quality product and service provided.”

We recommend the use of an impermeable (non-breathable) roofing membrane such as Protect Wunderlay. Impermeable membrane prevents water vapour from passing through the membrane and therefore the slates can be fixed directly to board or batten with a mechanical ventilation channel installed underneath the membrane (or OSB/ply on a fully-boarded system). When using a permeable (breathable) membrane, the membrane needs to be ventilated over the top, as water vapour penetrates through it, this means the use of a more expensive counter batten system being fitted directly underneath the slates, on top of the permeable membrane, and this void to be mechanically ventilated to allow the membrane to function correctly. Fitting an impermeable membrane is the most cost-effective and efficient way to fix TapcoSlate as they are classed as an "insufficiently air-open" roof covering with regards BS 5250, so be sure to mention this to any membrane supplier when seeking advice.

We recommend the use of an impermeable (non-breathable) roofing membrane such as Protect Wunderlay. Impermeable membrane prevents water vapour from passing through the membrane and therefore the tiles can be fixed directly to board or batten and a mechanical ventilation channel should be installed under the membrane (or OSB/ply on a fully-boarded system). When using a permeable (breathable) membrane, the membrane needs to be ventilated over the top, as water vapour penetrates through it, this means the use of a more expensive counter batten system being fitted directly underneath the tiles, on top of the permeable membrane, to allow the membrane to function correctly. Fitting an impermeable membrane is the most cost-effective and efficient way to fix Select Shake as they are classed as an "insufficiently air-open" roof covering with regards BS 5250, so be sure to mention this to any membrane supplier when seeking advice.

The Wee House Company is no stranger to bespoke modular homes, in fact it understands that “one size doesn’t fit all”, which is why the Company works with end-users to create a bespoke Wee House that is perfect for their individual requirements. A bespoke Wee House can be any shape or size and gives the customer flexibility over room size, number of bedrooms, bathrooms and there’s even the option to add another storey. Customers are afforded a high level of customisation whereby almost every element of their home can be chosen to suit their own personal style, from kitchens and bathroom suites to ironmongery and paint colours. There are Wee Houses in an array of colours from pretty pale pink to funky forest green and many customers have opted for distinctive details such as a vaulted ceiling, decorative barge board finishing on the roof or a striking wood burning stove.

The efficiencies gained through running site preparation and module construction concurrently meant that the build was completed within 16 weeks, delivered on time and on budget! The style of the house complements its very picturesque setting and is in-tune with the island’s surrounding architecture. The house has the proportions of a traditional cottage, clad in vertical larch with a TapcoSlate Classic composite slate roof and coloured front doors sit comfortably in the stunning, rural landscape with itsbackground rolling hills and outlook to the sea; quiet, tranquil and calm. In terms of design, a lot of consideration was given to the owners’ island living, with larger-than-normal larder cupboards installed in the kitchen to store bulk supplies during winter months as well as generous storage for outdoor apparel in the porch area.

Because DaVinci Select Shake has a rib-structure on the underside, care must be used when installing Select Shake in valleys. Open or closed valley systems may be used with variants of each system. Whether installing an open or a closed valley system, valley metal can be made from 24" (610mm) stock of copper, minimum 0.5mm thick aluminum, or minimum 0.37mm width clad steel if you prefer to make your own. It is recommended to use self-adhered membrane in valleys if possible/available. Alternately, pre-formed ABS plastic or GRP valley accessories, available from most roofing retailers (both over-the-counter or online), can be used, as well as forming valleys out of lead (or lead substitute) in the traditional way. Note that for closed valleys it is best to use a Double "W" profile valley with Select Shake.

This all depends on if our Dry Verge is fitted or not. If our Dry Verge product is fitted, the simplest way to finish the ridge at the gable is to slide the end cap into the Dry Verge itself, similar to the slates below it. The Dry Verge would need to be mitred at the apex appropriately, or one of our Dry Verge Apex Units should be fitted to suit. If our Dry Verge product is not being utilised, then a natural "drip edge" should be formed with the slates overhanging by 38mm to 50mm over the verge. The ridge, in this case, can be left as part of the drip edge, or can alternatively be finished with either one of our Ridge End Caps, or one of these can be manufactured onsite by using a cut piece of TapcoSlate and glueing this in place (full details of this process is available in our Fixing Guide).

Select Shake is a fairly new addition to the UK marketplace, and therefore, as yet, has not been approved for use on Listed properties and Conservation Areas in the UK. However, this does not mean that the product will be dismissed outright. As not all applications will be approved, the key to this is to speak to your local planning officer and get them "on-board", make a comprehensive statement and a proper discussion on your preferred building materials. We can help you with this process by supplying product samples, including our larger display boards which shows more accurately how Select Shake will look in situ. Please Contact Us or Request Colour Samples stating that you would like a full display board to discuss with planning.

Launched in 2013, The Wee House Company is blazing a trail in modular house building. With a desire to make custom build properties accessible anywhere in the UK, father and daughter Ian Hope and Jennifer Higgins joined forces to design, build and deliver homes quickly and cost effectively, all with a depth of construction experience that places them at the forefront of modular build innovations. Ian and Jennifer realised some time ago that modular construction has a number of benefits and is a real cost-effective method of creating a custom home for a plot of land. By building 95% of the home in-factory, customers’ benefit from the economies of scale normally reserved for larger housing developments – which is no small cost-saving!

Tapco Roofing Products官网介绍配图1

Tapco Roofing Products官网介绍配图2

Tapco Roofing Products官网介绍配图3

分享0